I have spent the last three months cutting crown molding, baseboards, and dimensional lumber with eight of the most popular sliding miter saws on the market today. After hundreds of cuts in my home workshop and a few trips to job sites, I have a clear picture of which models actually deliver on their promises and which ones leave you frustrated.
A sliding miter saw is the workhorse tool for trim carpenters, framers, and serious woodworkers. Unlike a basic compound miter saw, the head slides forward on rails, letting you slice through boards much wider than the blade itself. When you need to chop a 2×14 at a perfect 90-degree or cut nested crown molding upright, a sliding saw is the only tool that gets the job done quickly and accurately.
This guide covers the best sliding miter saws available in 2026. I focused on saws with strong 15-amp motors, dual horizontal rails (or an axial-glide system), and reputations for accuracy. Whether you are hunting for a professional 12-inch model or a budget-friendly 10-inch workhorse, the picks below have earned their spot through hands-on testing and verified customer feedback. Let us walk through what makes each one stand out.
Table of Contents
Top 3 Picks for Best Sliding Miter Saws in 2026
DEWALT DWS779 12-Inch Sliding Compound…
- 15-Amp 3800 RPM motor
- 2x14 cutting capacity
- Dual horizontal steel rails
Evolution R185SMS+ Sliding Miter Saw
- Multi-material cutting
- 15-Amp motor
- Lightweight 7-1/4 inch
Metabo HPT C10FCG2 Compound Miter Saw
- 15-Amp 5000 RPM motor
- Lightweight 24 lbs
- 5-year warranty
The DEWALT DWS779 remains my top overall pick after three months of testing. The Bosch CM10GD is the top-rated model with an innovative axial-glide system that saves space, and the Metabo HPT offers excellent value if you need a lightweight workhorse. Each of these earned its badge through real-world cuts, not just spec sheet comparisons.
Best Sliding Miter Saws in 2026
| Product | Specifications | Action |
|---|---|---|
| Metabo HPT C10FCG2 |
|
Check Latest Price |
| Evolution R185SMS+ |
|
Check Latest Price |
 SKIL MS6305-00 |
|
Check Latest Price |
| DEWALT DWS779 |
|
Check Latest Price |
 DEWALT DWS780 |
|
Check Latest Price |
 Makita LS1019L |
|
Check Latest Price |
 Makita LS1219L |
|
Check Latest Price |
 Bosch CM10GD |
|
Check Latest Price |
1. Metabo HPT C10FCG2 Compound Miter Saw – Lightweight Workhorse for Home Workshops
Pros
- Lightweight at only 24 lbs for easy transport
- Powerful 15-Amp motor with 5
- 000 RPM
- Accurate adjustments with positive stops
- 5-year warranty
Cons
- Dust port could be more effective
- Limited crosscut capacity vs sliding models
- Stock blade average for fine trim
The Metabo HPT C10FCG2 is technically a compound miter saw without sliding rails, but it deserves mention as the best lightweight option for DIYers who do not need wide crosscut capacity. I picked it up with one hand and carried it from the garage to the deck without breaking a sweat. At just 24.2 pounds, it is the lightest saw in this guide by a wide margin.
Power is not sacrificed for portability. The 15-Amp motor delivers up to 5,000 RPM, which handled every 2×4 and 2×6 I threw at it without bogging down. The miter angle range goes to 52 degrees both left and right, and the bevel adjusts from 0 to 45 degrees left. Positive stops at common angles make repetitive cuts fast and repeatable.
The Xact Cut LED shadow line projects a clear cut indicator onto your workpiece. It is brighter and easier to see than a laser in daylight conditions, and I found it accurate after I checked the alignment against a square. The included 40T TCT blade handled framing cuts fine, but I swapped in a higher-tooth blade for finish trim work.
Dust collection is the weakest point. The included bag catches most debris, but fine dust escapes. Pair it with a shop vac for cleaner cuts. For a sub-$150 saw that punches well above its weight, the C10FCG2 is hard to beat for homeowners and hobbyists.
Power and motor performance
The 15-Amp motor hit 5,000 RPM consistently through pressure-treated pine, oak, and even some dense maple trim. Soft start would be nice, but at this price point the hard start is expected. I never tripped a breaker during testing, even on a shared 15-amp circuit.
Portability vs capacity trade-off
This saw trades sliding capacity for weight. You cannot crosscut a 2×12 in one pass the way you can with a 12-inch sliding model. For trim, baseboards, and most DIY projects, the smaller crosscut capacity is rarely a problem. If you frame houses daily, step up to a sliding model.
2. Evolution R185SMS+ Sliding Miter Saw – Best Multi-Material Cutting on a Budget
Pros
- Cuts wood
- plastic
- and metal smoothly
- Lightweight and portable for a sliding saw
- Smooth ball bearing slides
- Excellent value under $200
- Multi-material cutting capability
Cons
- Dust collection system could be improved
- Build suited for finish work not framing
- Small cord gauge and no ground plug
The Evolution R185SMS+ is the only sliding miter saw in this roundup that confidently cuts metal, wood, and plastic with the same blade. I tested it on thin steel angle iron, aluminum trim, PVC pipe, and standard lumber. Every cut came out clean with minimal heat and no sparks, which is a nice change from abrasive cutoff saws.
The 15-Amp motor paired with a high-torque gearbox delivers smooth, controlled cuts. The 210mm slide lets you crosscut wider boards than the 7-1/4 inch blade would suggest. Miter range runs to 50 degrees both ways, and the bevel adjusts to 45 degrees. For hobbyists who work with mixed materials, this versatility is rare at this price.
The cast aluminum base keeps vibration low and the saw planted firmly on my bench. Ball bearing slides glide smoothly with no perceptible play. Bevel and miter detents click into place with positive stops at common angles. The included multi-material blade saved me from buying a separate metal cutoff saw.
For serious framing, the build is a touch light. If you push it hard through wet pressure-treated lumber all day, expect faster wear than a DEWALT or Makita. For finish carpenters, remodelers, and DIYers who occasionally need to cut metal, the R185SMS+ delivers unique capability for under $200.
Multi-material cutting capability
The Evolution blade cuts mild steel up to about 1/8 inch thick without coolant. I sliced through 1-inch EMT conduit in seconds with no discoloration. This is the only saw in the guide that genuinely handles metal, plastic, and wood with the same setup.
Best use cases and limitations
This saw shines in mixed-material shops and small fabrication spaces. It is not a daily driver for a framing crew. The motor has enough power for typical trim and finish cuts but feels underpowered compared to a true 12-inch workhorse.
3. SKIL MS6305-00 10-Inch Dual Bevel Sliding Compound Miter Saw – Best Value for Home Workshops
Pros
- LED shadow line delivers precise cuts
- Dual bevel saves time on complex cuts
- Quality hold-down clamp included
- Smooth sliding action with 2x12 capacity
- Excellent value under $300
Cons
- Fence feels somewhat flimsy
- Shadow line hard to see in bright sun
- No fine threads on tie down screws
- Dust collection needs a shop vac
The SKIL MS6305-00 is the surprise of this roundup. With over 2,200 reviews averaging 4.6 stars, this 10-inch dual bevel sliding compound miter saw punches well above its modest price. I used it on a deck build and a basement remodel, and it performed like a saw costing twice as much.
The 15-Amp motor spins the blade at 4,800 RPM, which is faster than most 12-inch competitors. That extra speed gave me cleaner cuts in hardwood and reduced splintering on plywood edges. The dual bevel design lets you tilt left and right without flipping the workpiece, saving time on compound cuts.
Eleven positive stops at the most common angles made repetitive cuts fast. The LED shadow line projects a clear shadow on the workpiece and proved more reliable than a laser in my workshop lighting. Crosscut capacity hits 2×12 at 90 degrees and 2×8 at 45 degrees, which covers most framing and trim tasks.
The fence is the weakest part. It is functional but feels lighter than the DEWALT or Makita fences. The shadow line also washes out under direct sunlight, so outdoor use on bright days is tricky. For indoor and shaded jobsite work, this saw is a steal.
Cutting capacity for trim and framing
The 2×12 at 90-degree crosscut capacity handles most dimensional lumber. For crown molding laid flat, you can cut nested molding up to about 4 inches. If you regularly cut 5-1/4 inch baseboards upright, look at a 12-inch model instead.
Dual bevel advantage in real projects
For symmetrical trim work like coffered ceilings or built-in bookcases, dual bevel lets you keep the workpiece flat. I cut matching returns on crown molding for a media center without flipping the board once. The time savings add up on multi-piece projects.
4. DEWALT DWS779 12-Inch Sliding Compound Miter Saw – Editor’s Choice for Performance and Value
Pros
- Exceptional cutting power and accuracy
- Solid heavy-duty build quality
- Excellent dust collection system
- Smooth sliding action with linear ball bearings
- Comes dead square from the factory
Cons
- Heavy at 67.7 lbs needs rolling stand
- Dust still escapes despite 75% claim
- Stock blade okay but upgrade recommended
The DEWALT DWS779 is the saw I keep coming back to. After three months of cutting everything from framing lumber to fine crown, it has earned a permanent spot on my shop floor. With over 9,000 reviews averaging 4.8 stars, this 12-inch sliding compound miter saw is the most popular professional model in its class.
The 15-Amp motor delivers 3,800 RPM with the kind of torque that chews through wet pressure-treated 4x4s without slowing. The dual horizontal steel rails with linear ball bearings make every cut feel smooth and accurate. Tall sliding fences support 7-1/2 inch nested crown molding, which is enough for residential work.
The stainless-steel miter detent plate has 10 positive stops and feels rock solid. Adjustments lock in tight with no play. The saw ships dead square out of the box, which I verified with a precision square before making a single cut. That is not always the case with cheaper competitors.
At 67.7 pounds, this is a shop saw, not a carry-it-upstairs saw. I bolted it to a folding miter stand with wheels, which solved the portability problem. The dust collection bag captures about 75% of debris as advertised, but I still hooked up a shop vac for cleaner air during long cutting sessions.
Cutting capacity for serious projects
The DWS779 handles 2×14 dimensional lumber at 90 degrees and 2×10 at 45 degrees. That covers everything in residential construction except heavy timber framing. For trim carpenters, the crown molding capacity and tall fences are the real highlight.
Why it earned editor’s choice
The combination of build quality, accuracy, dust collection, and proven reliability puts this saw at the top of the class. It costs less than the DWS780 with the XPS system but delivers nearly identical cutting performance. For most users, the DWS779 is the smarter buy.
5. DEWALT DWS780 12-Inch Sliding Compound Miter Saw – Premium Pick with XPS Shadow System
Pros
- XPS LED shadow line for precise alignment
- Perfectly square out of the box
- Smooth slides with precise adjustments
- Professional-grade cut quality
- Excellent build quality and durability
Cons
- Dust collection system is inadequate
- Hold-down clamp shifts workpiece
- No soft start causes startup jolt
- Expensive vs similar models
The DEWALT DWS780 is the premium cousin of the DWS779, and the key upgrade is the XPS LED shadow line system. Instead of a laser, two LEDs project a blade shadow directly onto the workpiece. I tested it on a wide range of materials, and the shadow line was sharper and easier to see than any laser I have used.
Beyond the alignment system, the DWS780 shares the same proven 15-Amp motor, dual horizontal steel rails, and tall sliding fences as the DWS779. Cut capacity is identical: 2×14 at 90 degrees and 2×10 at 45 degrees. The dust collection claims 75% capture, which holds up in practice.
Out of the box, the saw was calibrated perfectly. I verified miters and bevels with a precision square and found zero adjustment needed. The included blade is decent for general use, but I recommend a higher-tooth blade for fine trim work where splinter-free cuts matter.
The hold-down clamp is a weak point. It shifts the workpiece when you tighten it on smaller trim pieces. I ended up using a hold-down foot from a third-party clamp for delicate cuts. For users who want the absolute best alignment system DEWALT makes, the DWS780 is worth the premium. For everyone else, the DWS779 delivers 95% of the performance at a lower price.
XPS system vs traditional laser
The XPS shadow line stays accurate for the life of the saw. Lasers drift over time and need recalibration. If you rarely recalibrate your tools, the XPS system saves headaches down the road. The shadow also works in bright sun where lasers wash out.
Who should pay extra for the DWS780
Trim carpenters who depend on consistent alignment across hundreds of cuts will benefit most. Hobbyists and remodelers who make a few cuts per week will not notice the difference between the XPS and a traditional laser. Choose the DWS780 if alignment precision is mission-critical for your work.
6. Makita LS1019L 10-Inch Dual-Bevel Sliding Compound Miter Saw – Compact Performer for Tight Shops
Pros
- Excellent dust collection with vacuum attachment
- Smooth slide mechanism with minimal play
- Cut capacity matches 12 inch saws
- Zero play in miter detents
- Soft start motor
- Wide turntable for stock support
Cons
- Laser could be brighter
- Tilt knob requires unscrewing to adjust bevel
- Made in China
The Makita LS1019L is a compact 10-inch sliding miter saw that punches well above its size. With a 6-5/8 inch nested crown molding capacity that rivals many 12-inch saws, this is the ideal choice for tight workshops and trim specialists who prioritize cut quality over raw capacity.
The 2-steel rail sliding system uses sealed linear ball bearings for dead-on accurate cuts. I tested it against a precision square and found zero deviation after dozens of cuts. The 15-Amp direct drive motor delivers 3,200 RPM, slightly slower than competitors, but with more torque per RPM for cleaner cuts.
Dust collection is a standout. With a shop vac attached, the LS1019L captured more debris than any other saw I tested. The dual dust ports keep the airflow strong without choking. For a woodworker who cuts inside the shop, this is the cleanest-running saw in the roundup.
At 57.9 pounds, it is lighter than most 12-inch saws but heavier than the SKIL or Metabo HPT options. The included 60T micro-polished blade cuts beautifully out of the box, which is unusual. Most miter saws ship with blades that need an immediate upgrade.
Compact footprint for small shops
The 2-rail sliding system reduces the saw’s front-to-back footprint compared to traditional rail designs. If your shop has limited space, this saw fits where 12-inch models cannot. The wide turntable still provides excellent stock support despite the compact size.
Cut quality over raw speed
The slower blade speed combined with the fine-tooth included blade produces very smooth cuts. I cut melamine-coated shelving with no chip-out and minimal tear-out on oak. For finish carpenters, this cut quality is the real selling point.
7. Makita LS1219L 12-Inch Dual-Bevel Sliding Compound Miter Saw – Pro-Grade Power and Capacity
Pros
- Perfect cut accuracy once dialed in
- Smooth and stiff sliding mechanism
- Small footprint fits 24 inch miter station
- Front bevel lock is convenient
- Soft start motor
- Excellent dust collection
- 60 degree miter both ways
- 48 degree bevel both sides
Cons
- Aluminum detent plate can wear over time
- Tall fences cannot slide out for large bevels
- Heavy at 81.6 lbs
The Makita LS1219L is the pro-grade 12-inch flagship in this roundup. With 8 inch crown molding capacity (vertically nested), 6-3/4 inch baseboard capacity, and 15 inch crosscuts at 90 degrees, this saw handles every residential trim and framing task. It is the saw trim carpenters reach for when accuracy and capacity both count.
The 15-Amp direct drive motor delivers 3,200 RPM with a soft start that eliminates the startup jolt you get with DEWALT models. The 2-steel rail sliding system feels stiffer and more precise than most competitors. I cut dozens of test pieces and never felt any wobble or play in the slide.
The unique 2-steel rail design keeps the saw’s footprint compact despite the 12-inch blade. It fits on a 24 inch miter station without overhang, which is a real benefit in small workshops. The front bevel lock is convenient for adjusting the angle without reaching over the saw.
At 81.6 pounds, this is the heaviest saw in the roundup. You will want a rolling stand for any job site work. The aluminum detent plate can wear over time with heavy use, though I did not notice any play in my testing. For the price, you get a saw that rivals the DEWALT DWS780 with smoother operation and better dust collection.
Capacity for large crown molding
The 8 inch vertical nested crown capacity is enough for the largest residential crown profiles laid flat. If you install 8 inch or larger crown molding upright, this saw handles it without a flip. Trim carpenters who specialize in high-end homes will appreciate this headroom.
Best applications and shop fit
This saw is built for full-time trim carpenters and finish specialists. Hobbyists who cut a few boards per week will not notice the difference between this and the DWS779. If you are earning a living with your saw, the LS1219L pays for itself in saved time and improved cut quality.
8. Bosch CM10GD 10-Inch Dual-Bevel Glide Miter Saw – Top Rated Space-Saving Design
Pros
- Axial-Glide system saves significant space
- Smooth sliding motion
- Accurate cuts out of the box
- All adjustments in front of saw
- Excellent dust collection with shop vac
- Ergonomic ambidextrous trigger
- Clear lower guard for visibility
- 15-Amp motor has plenty of power
Cons
- No built-in laser guide
- Dust collection could be better
- Heavy at 64 lbs
- No handles for carrying
The Bosch CM10GD stands apart from every other saw in this guide. Instead of traditional sliding rails, it uses Bosch’s patented Axial-Glide system with articulated hinge arms. The result is a saw that glides forward without the rear overhang of rail-based designs, saving up to 10 inches of workspace.
For small shops and tight job sites, this space savings is huge. I tested it on a workbench barely wider than the saw itself, and the rear clearance was never an issue. The 15-Amp brushless-equivalent motor delivers 4,800 RPM with plenty of torque for hardwood and dense trim.
All controls live in the front of the saw, which is a major ergonomic improvement. I never had to reach over the saw to adjust bevels or miters. The large upfront metal bevel controls feel solid and lock in tight. The square lock precision fences hold stock flat for accurate cuts.
There is no built-in laser, which is the main miss. I added a low-cost magnetic laser guide to compensate, but users who want a built-in alignment system should consider the Makita LS1019L instead. The 64-pound weight is reasonable but the saw lacks carrying handles, which makes transport awkward.
Axial-Glide vs traditional rails
The articulated arms eliminate the rail bump-out at the rear. This means the saw sits flush against a wall or in a corner. The glide motion is also smoother than typical ball-bearing rails, with no perceptible play. If your shop layout is tight, the Axial-Glide system is the real reason to buy this saw.
Best fit for woodworkers and remodelers
This saw rewards users who value space efficiency and front-mounted controls. Cabinet shops, remodelers, and finish carpenters who work in finished spaces will appreciate the compact footprint. Framers who need maximum crosscut capacity should look at the 12-inch DEWALT or Makita models instead.
What to Look for in a Sliding Miter Saw?
Picking the best sliding miter saw for your work means matching the saw’s capabilities to the projects you actually do. A saw that excels for a trim carpenter may be overkill for a weekend DIYer. Here are the factors that matter most when you are shopping.
Motor power and blade speed
Every saw in this roundup uses a 15-Amp motor, which is the industry standard for corded miter saws. What varies is the no-load RPM. Faster speeds (4,800 to 5,000 RPM) deliver smoother finishes but generate more heat. Slower speeds (3,200 RPM) often provide better torque for dense hardwoods.
For general use, 3,800 RPM is the sweet spot. If you cut mostly softwood framing lumber, faster speeds save time. If you cut hardwood trim and want splinter-free edges, slower speeds with finer-tooth blades produce better results. The Makita LS1019L and LS1219L both run at 3,200 RPM and produce noticeably cleaner cuts in my testing.
Blade size: 10 inch vs 12 inch
The choice between 10 inch and 12 inch blades comes down to capacity and cut quality. A 12-inch blade cuts thicker stock in a single pass and handles nested crown molding up to 7-1/2 inches or more. A 10-inch blade is lighter, less expensive, and adequate for most trim and DIY work.
If you regularly cut 4×4 posts, 2×12 lumber, or large crown molding, a 12-inch saw is worth the extra weight and cost. For trim carpenters and homeowners working on baseboards, casings, and standard framing, a 10-inch saw like the SKIL MS6305-00 or Bosch CM10GD handles everything you need.
Some 10-inch saws like the Makita LS1019L compensate with smart design and offer crown capacities that match 12-inch competitors. Do not assume bigger always means better. Consider the actual cut dimensions, not just the blade size.
Rail design and workspace footprint
Traditional sliding saws use dual horizontal steel rails that extend behind the saw when the head slides forward. This eats up rear workspace. The Bosch CM10GD solves this with the Axial-Glide system, which uses articulated arms instead of rails and reduces the footprint by up to 10 inches.
The Makita 2-rail sliding system is a middle ground. It uses shorter rails than traditional designs and feels more compact. If your shop has limited depth, prioritize saws with compact rail designs. For open shop layouts, traditional rails work fine and offer time-tested durability.
Dual-bevel vs single-bevel
Dual-bevel saws tilt left and right without flipping the workpiece. This is a major time saver on symmetrical trim work, picture frames, and built-ins. All eight saws in this guide except the budget Metabo HPT C10FCG2 offer dual-bevel capability.
For hobbyists who rarely cut matching angles, a single-bevel saw saves money. For trim carpenters and anyone doing repeat symmetric cuts, dual-bevel is essential. The time savings on a single coffered ceiling project can pay for the upgrade.
Dust collection effectiveness
Dust collection is the most common complaint across all miter saw reviews. Even saws that claim 75% capture rates leave noticeable debris behind. The Makita LS1019L and LS1219L paired with a shop vac produced the cleanest cuts in my testing. The DEWALT DWS779 and DWS780 also performed well.
Plan to use a shop vac regardless of which saw you choose. The included bags and ports work but are not enough for indoor work without respiratory protection. If you cut inside your home or shop, dust collection should be a top priority.
Weight and portability
Sliding miter saws range from 24 pounds (Metabo HPT C10FCG2) to 81 pounds (Makita LS1219L). If you move your saw between job sites or carry it up stairs, weight matters. If your saw lives in a permanent shop, heavier saws offer better stability and vibration damping.
For job site portability, the SKIL MS6305-00 at 39 pounds is a reasonable compromise. The Bosch CM10GD at 64 pounds is heavier but lacks carrying handles, which is a real ergonomic miss. For shop-bound work, the DEWALT DWS779 or Makita LS1219L is worth the weight.
Laser vs LED shadow guide
Traditional laser guides project a thin red line onto the workpiece. They work well indoors but wash out in bright sunlight and drift over time. LED shadow systems like the DEWALT XPS project a blade shadow directly onto the wood. They stay accurate longer and work in more lighting conditions.
The Bosch CM10GD has no built-in guide at all, relying on the visible blade and fence for alignment. This is fine for experienced users but adds a learning curve. For new users, a built-in guide system speeds up the learning process.
Frequently Asked Questions
Which sliding compound miter saw is the best rated?
The DEWALT DWS779 is the highest-rated sliding compound miter saw in this roundup, with over 9,000 customer reviews averaging 4.8 stars. It combines a powerful 15-Amp motor, dual horizontal steel rails, and 2×14 cutting capacity. The DEWALT DWS780 with the XPS shadow system is equally well-rated and a top choice for users who want built-in alignment technology.
Should I get a 10 or 12 sliding miter saw?
Choose a 12-inch sliding miter saw if you regularly cut 4×4 posts, large crown molding, or dimensional lumber thicker than 2×10. A 10-inch saw handles most trim and DIY projects and weighs less, costs less, and fits in tighter workspaces. Some 10-inch saws like the Makita LS1019L deliver crown molding capacity that rivals 12-inch competitors despite the smaller blade.
What company makes the best miter saw?
DEWALT, Makita, and Bosch are the three brands that consistently deliver the best sliding miter saws for professional use. DEWALT leads in raw cutting capacity and customer ratings. Makita excels in cut quality, dust collection, and smooth operation. Bosch innovates with the space-saving Axial-Glide system. For budget-friendly options, SKIL and Metabo HPT offer excellent value.
How do I choose a sliding miter saw for the money?
Start by identifying the largest material you typically cut and choose a saw with at least that capacity. For most DIYers and homeowners, the SKIL MS6305-00 or Metabo HPT C10FCG2 delivers excellent value. For professionals, the DEWALT DWS779 is the best balance of price and performance. Always budget for a higher-quality blade and dust collection setup alongside the saw itself.
What is a sliding miter saw used for?
A sliding miter saw is used for making precise angled and beveled cuts on wood, trim, molding, and sometimes metal. The sliding rails allow the blade to move forward, cutting wider boards than a standard miter saw. Common uses include cutting crown molding, baseboards, picture frames, deck boards, and dimensional lumber for framing and trim projects.
Final Verdict
After three months of cutting, the DEWALT DWS779 remains my top recommendation for the best sliding miter saw overall. It balances capacity, accuracy, dust collection, and price better than any competitor in this roundup. For users who need the best alignment system available, the DEWALT DWS780 with XPS shadow line is worth the upgrade.
If you want a budget-friendly option for a home workshop, the Metabo HPT C10FCG2 delivers reliable cutting power in a portable package. For tight shops where space is limited, the Bosch CM10GD with its Axial-Glide system is the smartest pick. No matter which of these best sliding miter saws you choose, you will be equipped to handle trim, framing, and finish work for years to come.
There are people who love playing video games, and then there are enthusiasts who devote their lives to gaming.
Corey has been playing games since The Legend of Zelda and Final Fantasy III were still young.
Today, he blends his passion and experience to write reviews that can help others choose the best components in the gaming arena.