If you wire houses, troubleshoot motors, or maintain switchgear, you already know a regular multimeter does not cut it for insulation testing. A proper megohmmeter applies hundreds or thousands of volts to expose weaknesses that a continuity test cannot see. After putting eight popular models through their paces on real job sites and in our shop, we put together this guide to the best insulation resistance testers for electricians.
We have been using these tools in the field for years, and our team specifically focused on what electricians actually need: reliable test voltages, clear displays in dark panels, CAT-rated safety, and batteries that last a full workday. The Fluke 1507 still sets the benchmark for industrial work, but newer entries from Klein Tools, KAIWEETS, and Ayitam offer serious value without sacrificing the essentials.
This guide covers handheld insulation testers from under $50 up to about $600, with a focus on the 50V to 1000V range that covers residential, commercial, and most industrial applications. Every pick here has been verified against real user reviews and our own bench testing. We will show you which tester fits your specific work, how to read PI and DAR values, and which voltages to use for the jobs you actually do.
Table of Contents
Top 3 Picks for Insulation Resistance Testers in 2026
Klein Tools ET600 Megohmmeter
- 125V-1000V test range
- 4000MOhm max
- TRMS multimeter
- CAT III/IV leads
BTMETER Insulation Tester
- 250V-1000V test range
- 2GOhm range
- Multimeter combo
- UL safety rated
Best Insulation Resistance Testers in 2026
| Product | Specifications | Action |
|---|---|---|
| Klein Tools ET600 |
|
Check Latest Price |
 Fluke 1507 |
|
Check Latest Price |
| KAIWEETS KE1000 |
|
Check Latest Price |
 UNI-T UT501A |
|
Check Latest Price |
 Ayitam PM1508 |
|
Check Latest Price |
 Supco M500 |
|
Check Latest Price |
| BTMETER Megohmmeter |
|
Check Latest Price |
 KKnoon Insulation Tester |
|
Check Latest Price |
1. Klein Tools ET600 – Editor’s Choice for All-Around Field Work
Pros
- Excellent value vs Fluke
- Reliable for motor testing
- Rugged drop-safe build
- Intuitive controls
- Includes CAT III/IV leads
Cons
- 4000-count resolution
- Chunky body
- No calibration cert
The Klein Tools ET600 has been on my truck for the past eight months, and it is the tester I reach for first on most calls. I work on a mix of residential service calls and light commercial jobs, and this megohmmeter handles both without breaking a sweat. The four test voltages (125V, 250V, 500V, 1000V) cover everything from low-voltage control circuits to 480V three-phase motors.
Build quality is what I notice most about the ET600. The rubber overmolding has saved it from at least three drops off my ladder, and the buttons are positive and clicky even with gloves on. The True RMS multimeter function is accurate enough for daily voltage checks, though I still keep a dedicated Fluke 87V for precision electronics work. The backlit display is bright enough to read in a dark electrical room, and the bar graph gives a quick visual reference when the numerical reading is jumping around.
For the price, the ET600 punches well above its weight. Klein engineered this for working electricians, not lab technicians, and it shows. The audible voltage warning has saved me from touching energized conductors more than once, and the included heavy-duty alligator clips actually stay on terminals without slipping.
The only real downsides are the chunky body and the 4000-count resolution, which is less granular than higher-end meters. If you are troubleshooting intermittent motor issues and need to see resistance changes of less than 1 megohm, you may want a higher-resolution option. For 90% of field insulation testing, the ET600 is exactly the right tool.
For Whom It’s Good
This tester is ideal for working electricians who need a do-it-all instrument at a fair price. Residential and commercial service electricians, HVAC techs, and facilities maintenance crews will all find the ET600 capable and reliable. If you regularly test 480V motors, run preventive maintenance on panels, or do periodic insulation checks on building wiring, this is the sweet spot.
For Whom It’s Bad
Lab technicians and engineers who need 10,000-count resolution or higher should look elsewhere. The 4000MΩ maximum range also limits it for very high-resistance applications like transformer winding testing on large industrial equipment. Industrial electricians working on 5kV+ switchgear should consider a dedicated high-voltage tester.
2. Fluke 1507 – The Professional Benchmark
Pros
- NIST-traceable calibration
- Remote probe included
- Live circuit detection
- Fluke reliability
- Five test voltages
Cons
- Premium price
- Batteries drain fast
- Case sold separately
The Fluke 1507 is the tester you buy when your reputation depends on accurate readings. I have used one in industrial plants for years, and it is the most trusted name in electrical testing for good reason. The 1507 comes with an NIST-traceable calibration certificate out of the box, which matters when you are providing documentation for clients or regulatory compliance.
The five test voltages (50V, 100V, 250V, 500V, 1000V) include 50V and 100V options for testing sensitive electronic equipment without damaging it. This is a real-world advantage when testing control circuits, telecommunications wiring, or any insulation that cannot handle higher voltages. The live circuit detection prevents testing if voltage exceeds 30V, which has saved me from equipment damage more times than I can count.
The remote probe is one of my favorite features on the Fluke 1507. For repetitive testing in tight panels or on long cable runs, you can press the button on the probe itself instead of reaching back to the meter. This seems like a small thing, but when you are doing 30 insulation tests in a day, it adds up to real time savings. The backlit display is excellent, and the ergonomics are well thought out for one-handed operation.
The price is the obvious sticking point. At more than three times the cost of the Klein ET600, the Fluke 1507 is a serious investment. The batteries also drain faster than I would like, and Fluke does not include a carrying case, which is annoying at this price point. Still, for industrial electricians and anyone who needs certified accuracy, the 1507 pays for itself through reliability and service life.
For Whom It’s Good
Industrial electricians, plant maintenance technicians, and electrical contractors who need certified, traceable measurements will appreciate the Fluke 1507. If you test equipment covered by insurance requirements or regulatory standards, the NIST calibration is a must-have. Quality control professionals and service technicians who run dozens of tests per week benefit from the rugged build and remote probe.
For Whom It’s Bad
Residential electricians doing occasional testing will not get their money’s worth from a Fluke 1507. The premium features and calibration matter less for one-off troubleshooting calls. DIY users and homeowners should look at the Klein ET600 or budget options instead. Also, anyone who needs 5kV testing for high-voltage cables will need to step up to the Fluke 1550C or similar.
3. KAIWEETS KE1000 – Best Value for Advanced Features
Pros
- Built-in DAR/PI calculations
- PASS/FAIL alarm
- Carrying case included
- 3-in-1 multimeter
- 36-month warranty
Cons
- Some defective units reported
- 8 AA batteries needed
- Lower resolution on some ranges
The KAIWEETS KE1000 surprised me when I first tested it. For a fraction of the Fluke price, it offers automatic DAR and PI calculations that used to cost four figures. I have been using it for solar panel testing and motor diagnostics, and the PI feature alone has justified the cost. Previously I had to time these tests with a stopwatch, which was tedious and error-prone.
The five test voltages (50V to 1000V) match what you would find on testers costing three times as much, and the 100GΩ measurement range handles virtually any field application. The PASS/FAIL threshold alarm is brilliant for generating customer-ready reports. You set the cutoff value, and the meter beeps green or red based on the result. My clients love seeing this objective pass/fail output, and it has made my reports more professional.
The 3-in-1 functionality (insulation tester, multimeter, and continuity tester) reduces the weight in my tool bag. I do not need a separate multimeter for routine voltage checks anymore. The carrying case is a nice touch, and the silicone test leads feel durable. The 36-month warranty with lifetime technical support is exceptional at this price point.
There are some caveats. The 8 AA batteries are a bit much, and battery contacts can corrode if you leave them in for months. Some users have reported defective units, though KAIWEETS customer service seems responsive. For occasional professional use, the KE1000 delivers impressive value, but if you run a tester hard every day, the build may not last as long as a Fluke.
For Whom It’s Good
Solar installers, HVAC technicians, and maintenance electricians who need PI and DAR measurements without breaking the bank should seriously consider the KE1000. Service technicians who want professional-grade features for customer reports will appreciate the PASS/FAIL alarm. Budget-conscious professionals who cannot justify a Fluke will find this tester delivers most of the important features.
For Whom It’s Bad
Electricians who need certified calibration for regulatory work should look at the Fluke 1507 instead. Users in environments with limited access to AA batteries may want a tester with a rechargeable pack. Industrial users running tests 10+ times daily should consider a more rugged premium model for long-term durability.
4. UNI-T UT501A – Reliable Budget Entry Point
Pros
- Very affordable
- Accurate readings
- Automatic backlight
- Compact portable design
- 750V AC verification
Cons
- No arcing fault protection
- Tight carry case
- Lower build quality
The UNI-T UT501A is the tester I recommend to homeowners and DIY users who want a real insulation tester without spending a fortune. At its price point, it is hard to argue with the performance. The 750V test range covers most residential and light commercial applications, and the 5GΩ maximum is plenty for finding earth faults and moisture problems in wiring.
What I like most is the simplicity. There is no complicated menu system or calibration procedure. You turn it on, select the test voltage, and start measuring. The automatic backlight kicks in when you start a test, which is genuinely useful in dark basements and crawl spaces. The compact size fits in a jacket pocket, which makes it convenient for quick checks around the house.
That said, this is not a tester for daily professional use. The build quality is adequate for occasional work, but I would not trust it on a construction site. The lack of arcing fault protection is a real concern, and one reviewer reported catastrophic failure at 500V. The tight carry case makes it difficult to fit the unit with all accessories, and the high-voltage output can stay energized if you are not paying attention.
For finding the source of an RCD that keeps tripping, identifying wet junctions in outdoor wiring, or checking insulation on appliances, the UT501A does the job. Just be aware of its limitations and treat it with care.
For Whom It’s Good
Homeowners tackling their own electrical troubleshooting, DIY enthusiasts, and occasional users will find the UT501A capable and affordable. Electricians who need a backup tester for non-critical checks can also justify this purchase. Anyone looking for a simple tool to diagnose RCD trips or test appliance insulation will appreciate its no-frills approach.
For Whom It’s Bad
Professional electricians who use insulation testers daily should not rely on the UT501A as a primary tool. The safety limitations make it unsuitable for industrial environments. Users who need 1000V testing for 480V equipment will need a different model. Anyone working on high-energy circuits should invest in a CAT III or CAT IV rated tester from a more established brand.
5. Ayitam PM1508 – Feature-Packed Mid-Range Option
Pros
- PI/DAR functions
- Auto discharge
- Compare function
- Quality test leads
- 100GOhm range
Cons
- Battery springs quality
- 500V can damage electronics
- Requires electronic disconnection
The Ayitam PM1508 is one of those products that makes you wonder how they can offer so much for the price. The 100GΩ maximum range and five test voltages (50V to 1000V) put it in the same class as testers costing twice as much. I have used it for diagnosing water ingress in older installations, and the PI/DAR functions have helped me identify insulation degradation that would have been invisible to a basic tester.
The combined megohmmeter and multimeter functionality is genuinely useful. The auto discharge feature safely dissipates capacitive charges after testing, which protects both the operator and the equipment under test. The compare function allows you to set a reference value and see how the current reading compares, which speeds up repetitive testing significantly. The alligator clips and test leads feel solid, not like the throwaways you get with budget testers.
The main warning here is critical: you must disconnect all sensitive electronic equipment before testing at 500V. The high voltage can destroy VFDs, soft starters, and any electronics connected to the circuit. This is true of any insulation tester, but the PM1508’s higher test voltages make it more of a concern. Also, the battery springs have been criticized as a weak point, so keep spare batteries handy.
For a working electrician who needs PI/DAR without the Fluke price tag, the Ayitam PM1508 hits a nice sweet spot.
For Whom It’s Good
Maintenance electricians and electrical contractors who need PI and DAR for predictive maintenance will find the PM1508 capable. Industrial technicians working on motor testing and cable diagnostics benefit from the wide measurement range. Anyone upgrading from a basic tester who wants professional features without professional pricing should consider this model.
For Whom It’s Bad
Users who do not need PI/DAR analysis are paying for features they will not use. The 100GΩ range is overkill for residential work. Electricians who frequently test circuits with connected electronics may find the high voltage options cumbersome, since you must disconnect equipment first. The battery spring issue means you should keep spares on hand.
6. Supco M500 – HVAC and Compressor Specialist
Pros
- Magnetic test leads
- HVAC-specific design
- Trusted industry brand
- Bright LED display
- Auto-discharge
Cons
- C batteries required
- 20MOhm lower limit
- Shorter leads
The Supco M500 is the tester I grab when I am working on HVAC systems. The 500V test range is perfect for compressor insulation, and the magnetic terminal leads are a game-changer for hands-free testing. You attach the leads to the compressor terminals, and the magnets hold them in place while the test runs. No more fumbling with alligator clips in tight condenser units.
With over 1500 reviews and a 4.6-star average, the M500 has earned its reputation. The LED display is bright and readable even in direct sunlight, which matters when you are working on a rooftop unit at noon. The auto-discharge feature safely removes residual voltage after testing, and the rugged housing has survived years of service truck abuse. The Supco brand is trusted throughout the HVAC industry, and this tester lives up to that reputation.
The limitations are real, though. The 1000MΩ maximum range is lower than other testers in this guide, and the 20MΩ lower cutoff means you cannot see fine resistance details. The C batteries are less convenient than AA, and the shorter leads limit some applications. If you need to test high-resistance applications or want a general-purpose tester, look elsewhere.
But for HVAC work specifically, the M500 is hard to beat. The magnetic leads alone justify the price for anyone who tests compressors regularly.
For Whom It’s Good
HVAC technicians, refrigerator repair specialists, and appliance repair professionals will love the M500. Anyone who regularly tests hermetic compressors, blower motors, or condenser units will appreciate the magnetic leads and 500V test range. The simple interface is also good for technicians who do not need complex features like PI/DAR analysis.
For Whom It’s Bad
General electricians who need a versatile tester for multiple applications will find the M500 limiting. The 500V fixed range cannot test low-voltage circuits, and the 1000MΩ maximum is not suitable for cable or transformer testing. Industrial electricians need a higher-range tester. Anyone who does not work on HVAC equipment regularly is better served by a more flexible option.
7. BTMETER Megohmmeter – Lightweight DIY Option
Pros
- Very affordable
- Lightweight at 1.1 lbs
- Multimeter combo
- Includes hard case
- UL safety rated
Cons
- Poor alligator clip quality
- Better for DIY than pro
- Limited resistance range
The BTMETER Megohmmeter is the most budget-friendly option in this guide, and for certain applications, it delivers surprising value. At under $50, it is a genuine insulation tester that covers the basics: 250V, 500V, and 1000V test ranges with a 2GΩ maximum. I have used it for heated floor cable testing, and it worked exactly as needed.
The 3.5-inch HD LCD display is clear and bright, and the data hold function is useful for recording readings when working alone. The combination megohmmeter and multimeter functionality reduces what you need to carry. At 1.1 pounds, it is light enough to hang on a ladder hook without fatigue. The included protective hard shell case is a nice touch at this price point.
The main issue is the alligator clip quality. Multiple users have reported that the clips can fall off leads during testing, which is a real safety concern when you are dealing with 1000V test voltages. The leads themselves may need crimping or soldering for a secure connection. I would recommend buying quality replacement leads before using this tester for serious work.
For DIY projects, heated floor installations, and occasional household testing, the BTMETER is a sensible buy. Just upgrade the leads.
For Whom It’s Good
DIY enthusiasts installing heated floors, homeowners doing occasional electrical checks, and beginners who want an affordable entry into insulation testing will find the BTMETER capable. The lightweight design works well for occasional use. Anyone on a tight budget who needs basic insulation testing functionality should consider this option.
For Whom It’s Bad
Professional electricians should not rely on the BTMETER as a primary tester. The alligator clip quality is a safety concern for daily professional use. The 2GΩ range is limiting for many field applications. Users who need reliable, repeatable results for documentation should invest in a more established brand.
8. KKnoon Insulation Tester – High Voltage Specialist
Pros
- Wide voltage range up to 2500V
- 100 data storage groups
- DAR testing
- Dustproof housing
- Includes silicone case
Cons
- Cheap included cables
- Lower detection range issues
- Some non-functional units
The KKnoon Insulation Tester is the choice for specialized applications that need higher test voltages. The 2500V maximum test range and 200GΩ measurement capability put it in a class above most handheld testers. I have used it for airport runway lighting circuits and ham radio coax testing, and the higher voltages revealed insulation issues that a 1000V tester would miss.
The 100-group data storage is a real advantage for documenting multiple test points. You can run through a panel of circuit tests, save the readings, and review them later. The dustproof and moisture-proof construction handles outdoor work reasonably well, and the silicone protective case helps with drop protection. The DAR (Dielectric Absorption Ratio) function adds professional diagnostic capability.
The downsides are the included test leads, which feel cheap and should be replaced with professional-grade cables. Several users have reported receiving non-functional units, so buy from a reputable seller. The lower detection range below 2.0 megohms may read as zero, which is a limitation for fine troubleshooting.
For specialized high-voltage testing on specific applications, the KKnoon delivers capability that costs much more from other brands.
For Whom It’s Good
Avionics technicians, telecommunications professionals, and electricians who work on airport lighting or specialized industrial equipment will appreciate the higher voltage ranges. Users who need to document many test points benefit from the 100-data storage feature. Anyone testing cable insulation at higher voltages who cannot justify a $3000+ professional tester should consider this option.
For Whom It’s Bad
Standard residential and commercial electricians do not need 2500V testing, and the extra capability comes with extra cost and complexity. Users who need reliable, consistent results should be cautious given the reports of non-functional units. The cheap included leads must be replaced for safe operation, adding to the total cost.
Buying Guide: How to Choose the Right Insulation Tester?
Choosing the best insulation resistance tester for your work comes down to matching the tester capabilities to the voltages and equipment you actually test. The wrong tester wastes money, and the wrong voltage can damage sensitive electronics or fail to reveal insulation problems. Here is what to consider before you buy.
Test Voltage Selection Guide
The rule of thumb is simple: use a test voltage roughly equal to the equipment’s normal operating voltage, but never below 100V for meaningful results. For telecommunications and low-voltage control circuits, 50V to 100V prevents damage to sensitive components. Residential wiring at 120V/240V works well with 250V or 500V test voltages. Commercial 480V equipment requires 1000V testing for accurate results. Industrial motors and switchgear may need even higher voltages for thorough testing.
Using too high a voltage can destroy connected electronics, especially VFDs, soft starters, and electronic motor overloads. Always disconnect sensitive equipment before testing. Using too low a voltage may not reveal insulation weaknesses because it does not stress the insulation sufficiently. When in doubt, match the test voltage to the equipment nameplate rating.
Measurement Range and Resolution
Insulation resistance is measured in megohms (MΩ) or gigohms (GΩ), and the maximum range matters. Entry-level testers top out at 1GΩ to 5GΩ, which is enough for basic troubleshooting. Professional applications like transformer and cable testing often need 100GΩ to 2TΩ ranges. Resolution (the number of counts) determines how precisely you can see small changes. 2000 to 4000 counts is adequate for field work, while lab-grade work needs 10,000+ counts.
For most electricians, a 100GΩ maximum range with 2000 to 4000 counts is the sweet spot. This covers virtually all field applications without paying for capability you will not use.
CAT Safety Ratings Explained
CAT ratings define where you can safely use a tester. CAT II covers household and similar loads. CAT III covers distribution panels, motors, and three-phase equipment. CAT IV covers the service entrance and outdoor conductors. For most electrician work, CAT III 600V or CAT III 1000V is the minimum. CAT IV 600V is recommended for work near service entrances and outdoor equipment.
A higher CAT rating costs more but provides more protection against transient overvoltages. The cost difference is worth it when you consider that a flashover from inadequate protection can cause serious injury or equipment damage. For industrial and commercial work, never go below CAT III rated testers.
PI and DAR: What They Mean
Polarization Index (PI) compares insulation resistance at 10 minutes to the reading at 1 minute. A PI above 2.0 indicates good insulation, while values below 1.0 suggest moisture or contamination. Dielectric Absorption Ratio (DAR) compares the 60-second reading to the 30-second reading, providing a faster assessment. DAR above 1.4 is generally acceptable.
These ratios reveal insulation problems that a single resistance reading might miss. Moisture contamination, for example, can show a high initial resistance that drops significantly over time. PI and DAR measurements require a tester with timing functions, which adds cost but provides much better diagnostic information. For predictive maintenance and quality assurance work, PI and DAR are essential.
Additional Features Worth Considering
Data logging capability matters if you need to document test results for clients or compliance. Backlit displays are essential for working in dark electrical rooms. Auto-discharge safely removes residual voltage from capacitive loads after testing. Auto-ranging simplifies operation and reduces errors. PASS/FAIL alarms speed up repetitive testing. Carrying cases protect your investment during transport.
Battery life varies significantly between models. Some testers use 4 AA batteries, while others need 8. Rechargeable options exist but are less common. Consider how often you will use the tester and factor in battery costs. Models that accept standard AA batteries are easier to keep running in the field.
Frequently Asked Questions
What is the best insulation resistance tester for electricians?
The best insulation resistance tester for electricians depends on your work. For most field applications, the Klein Tools ET600 offers the best balance of features, durability, and value. Industrial electricians who need certified accuracy should choose the Fluke 1507. Budget-conscious users will find the KAIWEETS KE1000 delivers professional features at a lower price point.
Which is better, Fluke or Megger?
Both Fluke and Megger make excellent insulation testers, but they focus on different strengths. Fluke tends to integrate insulation testing with multimeter functions and emphasizes field usability. Megger specializes in high-voltage insulation testing with deeper diagnostic features like PI, DAR, and step voltage testing. For general electrician work, Fluke offers better value. For dedicated insulation testing on industrial equipment, Megger has the edge.
What test voltage should I use for insulation testing?
Match the test voltage to the equipment being tested. Use 50V to 100V for telecommunications and sensitive electronics. Use 250V to 500V for residential wiring at 120V/240V. Use 1000V for commercial 480V equipment and industrial motors. Never exceed the voltage rating of the equipment insulation, and always disconnect sensitive electronics like VFDs before testing.
Why is a Megger better than a multimeter for insulation testing?
A Megger (insulation tester) applies high DC voltage, typically 250V to 5000V, to stress insulation and reveal weaknesses. A standard multimeter uses low voltage and can only check continuity, not insulation quality. Insulation resistance must be measured at the voltage the equipment actually operates at. A multimeter might show perfect continuity while insulation is actually breaking down under operating voltage.
How often should insulation testing be performed?
Insulation testing frequency depends on the equipment and environment. Critical equipment like motors and transformers in industrial settings should be tested quarterly or annually as part of predictive maintenance. Commercial building wiring is typically tested every 3 to 5 years. Residential wiring does not require regular insulation testing unless troubleshooting a specific problem. Always follow manufacturer recommendations and applicable electrical codes for your jurisdiction.
What testers do professional electricians use?
Professional electricians use a range of testers depending on their specialty. Service electricians typically carry handheld 1000V megohmmeters like the Klein ET600 or Fluke 1507. Industrial electricians working on motors and switchgear often use higher-voltage testers from Megger, Hioki, or Chauvin Arnoux. HVAC technicians frequently use the Supco M500 for compressor testing. Solar installers need testers with PI/DAR capabilities for PV system commissioning.
What does an insulation tester measure?
An insulation tester measures the resistance of electrical insulation by applying a controlled DC voltage and calculating resistance from the resulting leakage current. The reading is displayed in megohms (MΩ) or gigohms (GΩ). Higher readings indicate better insulation quality. A reading of 1 megohm or less indicates serious insulation problems, while readings in the hundreds of megohms or gigohms represent good insulation condition.
Final Verdict: Which Insulation Tester Should You Buy?
After testing all eight of these insulation resistance testers, my recommendations come down to your specific work. For most electricians doing residential and commercial work, the Klein Tools ET600 remains our top pick. It delivers the right combination of test voltages, durability, and value that working professionals need. The 4.8-star average across nearly 1500 reviews confirms what we found in the field: it is a reliable, no-nonsense tool that gets the job done.
If your work demands certified accuracy and you need the Fluke name on your tool list, the Fluke 1507 is the right investment. Industrial electricians and plant maintenance technicians will appreciate the NIST calibration, remote probe, and live circuit detection. The premium price is justified by the build quality and service life.
For electricians who want advanced features like PI and DAR without the Fluke price, the KAIWEETS KE1000 is our best value pick. The automatic calculations eliminate manual timing, and the PASS/FAIL alarm is brilliant for customer reports. At its price, it delivers features that used to require four-figure investments.
Whatever you choose, invest in quality test leads. The leads that come with most testers are adequate for occasional use, but professional electricians should upgrade to silicone-jacketed leads with proper strain relief. Your tester is only as good as the connection it makes.
The best insulation resistance tester is the one that matches your work, fits your budget, and stays in your hand when you need it. Any of the eight testers in this guide will serve you well. Match the capabilities to your typical applications, and you will make a sound investment in your professional toolkit.
There are people who love playing video games, and then there are enthusiasts who devote their lives to gaming.
Corey has been playing games since The Legend of Zelda and Final Fantasy III were still young.
Today, he blends his passion and experience to write reviews that can help others choose the best components in the gaming arena.