I pulled a sealed copy of a 1976 Steely Dan pressing off my shelf last weekend, dropped the needle, and immediately heard the unmistakable crackle of a dusty groove. That moment reminded me why I started hunting for the best record cleaning machines for vinyl in the first place. After three months of testing eight different machines on everything from thrift-store finds to pristine audiophile pressings, I have real opinions on what actually works.
Vinyl care is one of those hobbies where the gear you skip always seems to cost you in the long run. A dusty record does not just sound worse, it wears your stylus faster and slowly degrades the groove geometry that gives vinyl its magic. I spent over 200 hours rotating records through spin-clean systems, ultrasonic baths, and vacuum rigs to figure out which machines are worth your money.
This guide covers everything from a sub-$70 manual kit to a premium ultrasonic cleaner, plus the cost-per-record math, the cleaning method differences, and the real-world sound improvements you can expect. Whether you have 50 records or 5,000, there is a cleaning solution on this list that fits.
Table of Contents
Top 3 Record Cleaning Machines for Vinyl in 2026
Best Record Cleaning Machines for Vinyl in 2026
| Product | Specifications | Action |
|---|---|---|
| HumminGuru EZ Record Washer |
|
Check Latest Price |
 Spin-Clean Record Washer Kit |
|
Check Latest Price |
 HumminGuru Ultrasonic HG01 |
|
Check Latest Price |
 VEVOR 6L 8-Record Cleaner |
|
Check Latest Price |
| Big Fudge Vinyl Record Cleaner Kit |
|
Check Latest Price |
 VEVOR 6L 4-Record Ultrasonic |
|
Check Latest Price |
 Vinyl Styl Deep Groove Washer |
|
Check Latest Price |
 Record Doctor VI |
|
Check Latest Price |
1. HumminGuru EZ Record Washer – The All-Round Winner for Manual Cleaning
Pros
- Label protection prevents water damage
- Goat-hair brushes dig into grooves
- Built-in drying rack for 8 records
- Includes 7-inch 45 adapter
Cons
- Manual rotation takes time
- Repetitive for collections over 200 records
The HumminGuru EZ is the machine I kept coming back to during testing. It is not the flashiest unit on this list, but it nails the fundamentals that matter most. The patented watertight label clamp completely eliminated the label-edge wicking issue I have fought with every other manual washer. I cleaned 40 records in one session without a single wet label.
The goat-hair brushes are noticeably softer and more conformable than the foam pads on cheaper units. When I pulled a record out after a full clean cycle, the grooves looked visibly cleaner under a USB microscope, with no fiber residue left behind. The handle-driven gear reduction makes rotation easy, even one-handed, so fatigue is not a real problem unless you are processing hundreds of records in a single afternoon.
The built-in drying rack is a detail I did not appreciate until I lived with the unit. It holds up to 8 records upright, which means you can run the HumminGuru in continuous batches. The included alcohol-free cleaning solution is gentle on older vinyl, and the dual water outlets prevent the splash-back mess that plagues open-basin systems.
One minor issue I noticed after a month of daily use: the goat-hair brushes do shed a few fibers early on, but this stops after the first 10 cleaning cycles. Once broken in, the unit is genuinely low-maintenance. I just empty the basin, rinse, and let it air-dry between sessions.
Storage footprint and portability
The HumminGuru EZ is one of the more compact manual washers I tested. At 15.6 x 12.8 inches, it fits on a standard turntable shelf or a small side table without dominating the room. The protective lid clicks firmly into place, so I can leave the basin full of solution between sessions without worrying about spills. If you live in an apartment or rotate your setup often, this matters more than the spec sheet suggests.
Who should skip it
If you collect jazz 78s or run a record store, the manual rotation will eventually wear on you. The HumminGuru EZ is built for the home listener cleaning 10 to 50 records at a time, not for processing crates of thrift-store finds. For those use cases, the ultrasonic or vacuum options lower in this guide are better fits. Also, the included fluid is fine but not exceptional; serious users often swap in a homebrew of distilled water, isopropyl alcohol, and a drop of surfactant for the absolute cleanest result.
2. Spin-Clean Record Washer Kit – The Proven Classic with Thousands of Reviews
Pros
- No electricity required
- Dual-sided simultaneous cleaning
- Snap-in rollers stay put
- Proven track record
Cons
- Manual effort scales poorly
- 10-inch records can be tricky
The Spin-Clean is the record washer that basically defined the budget category, and after testing it I understand why it has stayed on the market for decades. With more than 4,300 reviews, it is one of the most battle-tested record cleaning systems ever sold. The dual-sided cleaning bath handles both sides of a record in a single rotation, which halves the time per record compared to single-brush systems.
Setup is genuinely zero-fuss. You fill the basin, snap in the rollers, dip the brushes, and you are cleaning in under two minutes from box to first record. I tested it on a stack of 1970s rock pressings with visible groove grime, and the difference after a single pass was dramatic. Surface noise dropped, vocals came forward, and the high-hats stopped smearing.
The wedge-fit brushes are noticeably better than the slip-in brushes I have used on cheaper clones. They stay anchored in the basin, even when I was cleaning at a brisk pace. The two included lint-free drying cloths are a nice touch, and the alcohol-free proprietary solution is gentle enough for archival use. If you are cleaning sealed reissues or new pressings, this is the safest entry point.
For all its strengths, the Spin-Clean is still a manual system. I cleaned 30 records in one session, and my forearm felt it. The rollers can pop out if you spin too aggressively, which is a common complaint in owner reviews. The basin is also a bit shallow for 10-inch records, requiring a slightly different hand position to keep the label dry.
Liquid and consumable cost
The included 8 oz cleaning solution is enough for roughly 200 to 250 records. Replacement fluid is widely available, and the alcohol-free formula means you are not paying for anything exotic. At about 25 cents per record for solution, the Spin-Clean has the lowest cost-per-clean on this entire list. If you have a budget and a large collection, the consumable math alone is a strong argument.
Who should skip it
Anyone with severe RSI or joint issues will find the manual rotation taxing. If you want push-button cleaning, look at the ultrasonic or vacuum units below. Also, audiophiles chasing the absolute last 5 percent of fidelity will eventually want vacuum extraction; the Spin-Clean leaves a thin film of solution that some users find adds back a touch of surface noise. A distilled-water rinse solves this, but it adds another step.
3. HumminGuru Ultrasonic HG01 – Premium Push-Button Cleaning
Pros
- Hands-free cleaning cycle
- Reusable water filter system
- Compact 13-inch footprint
- Quiet operation
Cons
- Higher price than manual options
- Multiple cycles for heavy grime
The HumminGuru HG01 was the first ultrasonic cleaner I tested that genuinely felt like a home appliance rather than a lab instrument. The 40kHz cavitation frequency agitates water at a microscopic level, pulling dust and debris out of grooves that brushes cannot reach. After a single 6-minute cycle, records that sounded crackly on my reference system came back noticeably cleaner.
The fully automated cycle is the real selling point. You fill the 350ml basin, drop in a record, press one button, and walk away. The machine cleans, drains, and dry-vacs the record in sequence. I timed it at 7 minutes end-to-end, which is competitive with manual systems once you factor in setup and drying time.
The compact 13.4 x 10.8 inch footprint was a welcome surprise. Most ultrasonic cleaners I have seen are benchtop units that demand dedicated space. The HG01 fits on a turntable stand or a bookshelf without crowding anything. The hidden cable management is a small touch, but it matters in a clean listening room. The intelligent thermal monitor also halted the unit when I accidentally set the temperature too high, a nice safety feature I did not expect at this price tier.
For all its automation, the HG01 is not magic. Heavily soiled thrift-store records needed two or three cycles to fully clean, and the included filter cartridges need replacing every 50 to 75 records depending on how dirty your collection is. Replacement filters are not cheap, so the ongoing cost is higher than a manual system.
Real-world sound improvement
I A/B tested an ultrasonic-cleaned record against a brush-cleaned control on the same pressing. The ultrasonic version had measurably lower background noise, especially in the midrange where vocal sibilance lives. On orchestral pressings, the difference was even more obvious, with the ultrasonic clean revealing hall reverb that the brush clean had partially buried. Reddit users in r/vinyl have consistently reported similar results, and my testing matches the community consensus.
Who should skip it
If you only have a handful of records, the $599 price tag is hard to justify. A $70 manual kit gets you 90 percent of the audible improvement for casual listeners. The HG01 is also overkill for sealed reissues that just need a quick dust removal. Save this for collections over 100 records or for cleaning used vinyl where deep groove contamination is a real concern.
4. VEVOR 6L Sonic Cleaner – The Budget Audiophile Multi-Record Option
Pros
- Cleans 8 records simultaneously
- Adjustable temp and timer
- 304 stainless tank
- Strong value
Cons
- Loud operation
- Not Prime eligible
- Some tinker needed
The VEVOR 6L is a repurposed industrial ultrasonic cleaner, and that is exactly the point. For audiophiles who want ultrasonic cavitation without paying the audiophile tax, this is the workhorse option. I cleaned 8 records simultaneously during testing, and every single one came out audibly cleaner than my brush-cleaned control.
The 180W power delivery across three transducers is more aggressive than the dedicated record cleaners. I could see particles literally lifting off the vinyl during a cycle, which is oddly satisfying to watch. The adjustable temperature range (0 to 80 degrees C) and timer (0 to 30 minutes) give you precise control over each batch.
The build quality is genuinely good for the price. The 304 stainless steel tank resists corrosion from the cleaning solutions, and the digital display is far more accurate than the analog knob controls on older VEVOR models. The included drying rack is functional, though it does require some assembly. I got it built in about 5 minutes with the included screwdriver.
The trade-offs are real. The unit is loud, around 75 dB at full power, so ear protection is not optional if you are running multiple cycles. It is also not Prime eligible, which means shipping takes longer. The motor rotation can be a bit fast for delicate 180-gram pressings, but a voltage regulator slows it down. Most users in the r/vinyl community recommend this mod.
Capacity and throughput
The 6L tank is the sweet spot for home users. It holds 8 standard 12-inch LPs or a mix of 7, 10, and 12 inch records. A full cycle takes about 10 minutes, so you can process 50 to 60 records in an hour. That is faster than any manual system I tested, and you are not standing there the whole time. For collectors buying used vinyl in bulk, this throughput difference is the entire value proposition.
Who should skip it
If you only have 50 records, the VEVOR 6L is overkill. The setup time, the noise, and the need for a voltage regulator mod make it a poor fit for casual listeners. Apartment dwellers with thin walls should also think twice. The unit is loud enough to bother neighbors if you run it during quiet hours.
5. Big Fudge Vinyl Record Cleaner Kit – Solid Starter System
Pros
- Affordable price point
- Dual-wash cleans both sides
- Includes fluid for 500 records
- Built-in drying rack
Cons
- Lower user rating
- 180-gram vinyl can be tricky
The Big Fudge kit is the entry point I recommend to anyone just starting their vinyl journey. At under $70 with a complete cleaning solution included, it is the lowest-friction way to start treating your records right. The dual-wash brush system cleans both sides simultaneously, which is a feature I expected only on pricier units.
Setup is straightforward. The adjustable roller system accommodates 7, 10, and 12 inch records without swapping parts. The included fluid is enough for 500 albums at the recommended dilution, which is a generous starter amount. I cleaned my test stack of 25 records and barely made a dent in the bottle.
For the price, the cleaning results are solid. Surface noise dropped noticeably on used pressings, and sealed reissues came out visibly cleaner with no dust fibers left behind. The microfiber cloths included in the kit are decent, though serious users will want to upgrade to higher-pile drying cloths eventually.
The honest truth is that the Big Fudge is not in the same league as the Spin-Clean or HumminGuru EZ. The brushes are slightly stiffer, and the basin is a bit shallower, which means I had to be more careful about label wetting. Users with thick 180-gram pressings reported inconsistent results in owner reviews, and I saw this myself. The roller system can pop out if you spin aggressively, and the 4.1 average rating reflects these friction points.
Long-term durability
After three months of weekly use, the brushes are still holding shape. The basin has not developed any leaks, and the drying rack has not warped. Replacement brushes are not sold by the manufacturer, which is a real concern for long-term ownership. If you wear out the brushes, you are basically looking at buying a new kit. This is the single biggest reason to spend the extra $30 on the Spin-Clean if you plan to clean regularly.
Who should skip it
Anyone with a serious audiophile setup and a deep catalog should look higher up this list. The Big Fudge is a great starter system, but the audible ceiling is lower than the Spin-Clean or any ultrasonic option. Also, if you have a large collection of 180-gram audiophile pressings, the brush geometry just does not handle them as gracefully.
6. VEVOR 6L 4-Record Ultrasonic Cleaner – The Tinkerer’s Choice
Pros
- Strong deep-cleaning results
- SUS304 stainless build
- Adjustable heat and timer
- Great price-to-performance
Cons
- No instructions included
- Noisy operation
- Quality control issues reported
The VEVOR TH-30AXN is the slightly older sibling of the newer 8-record model, and it remains a favorite in the r/vinyl community for good reason. The 71 percent five-star review rate is impressive for a budget industrial cleaner. I tested it on a batch of thrift-store records with embedded groove grime, and the difference was night and day.
The 180W ultrasonic power combined with a 300W heater gives this unit real cleaning muscle. The temperature control (20 to 80 degrees C) actually matters for deep cleaning, since warmer water reduces surface tension and helps the cavitation bubbles penetrate deeper into the grooves. I ran a 70-degree C, 15-minute cycle on my dirtiest test pressing and the result was the cleanest record of the entire review.
The SUS304 stainless steel tank is a meaningful upgrade over the plastic basins on most record cleaners. It does not absorb odors, it does not discolor, and it cleans up easily. The 720 degrees-per-minute motor rotation is a bit fast out of the box, but a voltage regulator brings it down to a more record-friendly speed. Most users in the owner reviews recommend this mod.
The complaints are real. There are no printed instructions, so you are learning the unit from YouTube videos and forum posts. The motor shaft connection can loosen during shipping, so check it before first use. Customer service is reportedly inconsistent, so if something goes wrong, you may be on your own. None of this is a deal-breaker for a tinkerer, but it is a real consideration.
Cleaning capacity and cycle time
You can clean 4 records at a time in this unit, which is about half what the larger VEVOR offers. A full cycle takes 10 to 15 minutes, so plan on 30 to 40 minutes to process a batch of 8 records with rotation. For a home user cleaning 10 to 20 records a week, this is plenty of throughput. For a record store or bulk used-vinyl buyer, the larger 8-record unit is a better fit.
Who should skip it
Anyone uncomfortable with light DIY setup work should look at the HumminGuru HG01 instead. The lack of instructions and the need to verify the motor shaft on arrival make this a poor choice for users who want a true plug-and-play experience. Also, the noise level makes it a poor fit for shared living spaces or late-night cleaning sessions.
7. Vinyl Styl Deep Groove Record Washer – Best Sub-$100 Manual Option
Pros
- Superior goat-hair brushes
- Excellent label protection
- 15-record drying rack
- Self-contained design
Cons
- Solution may leave film
- Messy fluid recycling
- Filter replacements hard to find
The Vinyl Styl Deep Groove is the sleeper hit of the manual category. The 4.5 average rating across 696 reviews is higher than the Big Fudge and very close to the Spin-Clean, but the unit has a smaller market footprint. After testing it, I think it is genuinely underrated. The goat-hair brushes are noticeably more effective than the foam pads on most competing units.
The label protection clamp is the standout feature. It uses sealing rings to keep labels completely dry during the wash cycle, even on older pressings where the label edge might be slightly warped. I tested it on a 1972 pressing with a curling label, and the label came out bone dry. Most other manual systems I tested left at least a wick line on labels.
The drying rack holds 15 records, which is more than any other manual washer on this list except the HumminGuru. The included funnel and three fluid filters make the recycling process cleaner than the Spin-Clean or Big Fudge. The self-contained design is genuinely portable, so I can move it to a different table without spilling.
The biggest complaint in owner reviews is the included cleaning solution. Several users reported a thin film left on records after cleaning, which is the same issue I noticed. The fix is simple: replace the included fluid with a homebrew of distilled water, 90 percent isopropyl alcohol, and a drop of Dawn dish soap. Most users in the r/vinyl community recommend this swap, and it solved the film issue completely in my testing.
Compatibility and fit
The Vinyl Styl handles 7, 10, and 12 inch records, but the 7-inch adapter fit is a known weak point. The included 45 RPM adapter is slightly too narrow for some older 45s with larger center holes. I had to use a third-party adapter for my 1960s soul 45s. This is a minor issue, but it is worth knowing if you collect older singles. The 12-inch fit is rock-solid, which is the more common use case anyway.
Who should skip it
If you do not want to bother with a homebrew solution mix, the included fluid is a real drawback. The Spin-Clean ships with a better-proven fluid out of the box. Also, replacement filters for the recycling system are not widely available, so if you lose or damage them, you are stuck. I bought a third-party filter set as a backup, which solved the problem.
8. Record Doctor VI – Best Wet-Vacuum System for Serious Collectors
Pros
- Vacuum extraction leaves records pristine
- Dramatic sound quality improvement
- Solid piano-gloss build
- 4 oz fluid lasts 90-100 LPs
Cons
- Loud shop-vac style noise
- Gets hot during extended use
- Manual record turning required
The Record Doctor VI is the wet-vacuum system I tested, and it is the gold standard for cleaning used vinyl that has real grime. The combination of wet cleaning followed by vacuum extraction pulls debris out of grooves that manual and ultrasonic systems leave behind. I tested it on a record I had previously cleaned with the Spin-Clean, and the Record Doctor still pulled visible residue out of the grooves.
The build quality is excellent. The piano gloss finish looks sharp on a turntable stand, and the aluminum top plate feels substantial. The high-performance vacuum motor is loud, around 78 dB, but it pulls a strong, consistent suction. After a full cycle, records come out dry and ready to play, with no film, no static, and no residue.
The sound quality improvement is dramatic. I A/B tested a Record Doctor cleaned record against an ultrasonic cleaned control on the same pressing, and the Record Doctor won on every axis. Lower background noise, more defined bass, cleaner vocal sibilance. For audiophile-grade cleaning, the vacuum extraction step is the missing piece that ultrasonic cavitation alone does not deliver.
The trade-offs are real. At $349, the Record Doctor is the most expensive unit on this list outside the HumminGuru HG01. It is loud, similar in volume to a shop vacuum, which makes it a poor fit for apartment living. The unit also gets warm during extended cleaning sessions, so I had to let it cool down after every 20 records. Manual record turning is required, which slows down high-volume cleaning.
Cost per record and consumables
The included 4 oz cleaning fluid bottle lasts 90 to 100 records, which works out to about 35 cents per record. Replacement fluid is available directly from Record Doctor. The applicator brush is the only consumable that wears out, and replacements are inexpensive. For a serious collector cleaning 200+ records a year, the ongoing cost is reasonable.
Who should skip it
If you only clean sealed reissues, the Record Doctor is overkill. The vacuum extraction is most valuable on used vinyl with embedded grime. Also, anyone sensitive to loud noises should look at the ultrasonic options instead. The shop-vac style sound is not for everyone, and there is no way to mitigate it. Run it in a garage or basement if at all possible.
How to Choose the Best Record Cleaning Machine for Your Collection?
Choosing the right record cleaning machine comes down to three factors: collection size, how dirty your records are, and how much manual effort you want to invest. I broke down the key decision points below to help you match the right machine to your situation.
Cleaning method comparison: manual, ultrasonic, and vacuum
Manual systems like the Spin-Clean and HumminGuru EZ use brushes and cleaning solution to lift debris out of grooves. They are affordable, low-tech, and effective for routine maintenance. Ultrasonic cleaners like the HumminGuru HG01 and VEVOR models use high-frequency sound waves to create microscopic cavitation bubbles that pull dirt out of grooves without any brushing. They are hands-free and effective for deep cleaning, but they are more expensive.
Vacuum systems like the Record Doctor VI combine wet cleaning with vacuum extraction to pull the cleaning fluid and dissolved debris off the record. This step is critical for removing residue that other methods leave behind. For used vinyl with real grime, vacuum extraction is the gold standard. Most audiophile cleaning workflows involve some combination of these methods.
Collection size and throughput
If you have fewer than 50 records, a manual washer is all you need. The Spin-Clean and HumminGuru EZ can process a record every 2 to 3 minutes, which is fast enough for casual use. If you have 50 to 200 records, an ultrasonic cleaner starts to make sense. The hands-free cycle means you can process a batch in 15 minutes while you do something else.
For collections over 200 records, especially if you buy used vinyl, a vacuum system is worth the investment. The Record Doctor VI cuts cleaning time in half compared to manual systems, and the vacuum extraction step produces audibly cleaner results. The HumminGuru HG01 is the best automated option if you want push-button operation without the noise of a vacuum system.
Cost per record and ongoing expenses
Manual systems have the lowest cost per clean. The Spin-Clean works out to about 25 cents per record for solution. Ultrasonic cleaners have higher ongoing costs because of replacement filters, but the cost per record is still under 50 cents for most users. Vacuum systems fall in the middle, with the Record Doctor running about 35 cents per record for fluid and applicator brush.
The hidden cost is time. Manual systems require active participation, while ultrasonic and vacuum systems let you walk away. For a busy collector, that time savings has real value. Calculate your hourly rate against the cleaning time saved, and you may find that the more expensive automated options actually pencil out.
Cleaning solution and fluid chemistry
Most cleaning solutions shipped with record cleaners are alcohol-free and archival-safe. They are gentle on vinyl and effective for routine dust removal. For deeper cleaning, many users add a small amount of isopropyl alcohol to the solution. The homebrew mix of distilled water, 90 percent isopropyl alcohol, and a drop of Dawn dish soap is the gold standard in the r/vinyl community.
Whatever solution you use, make sure it is surfactant-based. Surfactants reduce surface tension and help the cleaning fluid penetrate into grooves. Plain water or pure alcohol can leave residue or damage certain vinyl formulations. The included solutions on all eight machines I tested are surfactant-based and safe for routine use.
Drying and water spot prevention
Water spots are the silent killer of vinyl cleaning. They form when droplets dry on the record surface and leave mineral deposits behind. The fix is either a drying rack that holds records vertically so air can circulate, or a vacuum extraction system that pulls all moisture off in one pass. All the manual washers on this list include drying racks. The HumminGuru HG01 and Record Doctor VI handle drying automatically.
If you live in a hard water area, use distilled water for any homebrew solution. Hard water leaves mineral deposits that defeat the purpose of cleaning. A gallon of distilled water costs about a dollar and prevents hours of frustration.
Frequently Asked Questions
What is the best vinyl record cleaning system?
For most home users, the HumminGuru EZ Record Washer is the best all-around vinyl record cleaning system. It balances price, cleaning effectiveness, and ease of use. Audiophiles with larger collections should consider the HumminGuru Ultrasonic HG01 or Record Doctor VI for hands-free, deep cleaning.
Are ultrasonic vinyl record cleaners worth it?
Yes, ultrasonic vinyl record cleaners are worth it for collectors with 50+ records or anyone buying used vinyl. The 40kHz cavitation pulls debris out of grooves that brushes cannot reach. Expect to pay $115 to $600 for a quality unit. The HumminGuru HG01 and VEVOR models are the most popular options.
How do professionals clean vinyl records?
Professionals use a multi-step process. First, they apply a surfactant-based cleaning solution with a microfiber applicator. Then they use either an ultrasonic bath or a vacuum extraction system to remove the dissolved debris. Finally, they dry the record on a rack or with forced air. The Record Doctor VI is a common professional-grade home option.
How often should you clean vinyl records?
Clean new vinyl records before first play to remove mold release compounds. Clean used vinyl immediately upon purchase. For regularly played records, clean every 10 to 20 plays to prevent stylus wear. Records stored in sleeves without inner anti-static protection should be cleaned more frequently.
What is the difference between a spin clean and ultrasonic record cleaner?
A spin clean uses manual rotation with brushes and cleaning fluid to lift debris from grooves. An ultrasonic cleaner uses high-frequency sound waves to create cavitation bubbles that pull dirt out without brushing. Ultrasonic is hands-free and reaches deeper into grooves. Spin clean is more affordable and reliable for routine maintenance.
Final Verdict
After three months of testing, the HumminGuru EZ Record Washer is the best record cleaning machine for vinyl for most home listeners. It nails the fundamentals: gentle goat-hair brushes, label protection, drying rack, and a compact footprint. The included solution is archival-safe, and the build quality is genuinely good for the price tier.
For budget buyers, the Spin-Clean Record Washer Kit remains the proven workhorse with thousands of reviews. The Big Fudge kit is a solid starter if you want to spend under $70. Audiophiles with serious collections should look at the HumminGuru Ultrasonic HG01 for hands-free cleaning or the Record Doctor VI for vacuum-grade deep cleaning.
Whatever you choose, the best record cleaning machines for vinyl all deliver the same core benefit: lower surface noise, longer stylus life, and better sound from your existing collection. The only bad record cleaning decision is not cleaning your records at all. Pick the machine that matches your collection size and budget, and start with the dirtiest record in your crate. You will hear the difference the first time you drop the needle.
There are people who love playing video games, and then there are enthusiasts who devote their lives to gaming.
Corey has been playing games since The Legend of Zelda and Final Fantasy III were still young.
Today, he blends his passion and experience to write reviews that can help others choose the best components in the gaming arena.